The main rason of leading to overhigh hydrogen content was insufficient anneal after forged.
علت اصلی ایجاد محتوای بالای هیدروژن، عدم کافی بودن عملیات تنلیم پس از آهنگری بود.
The resistivity and flexivity of the resistance thermostat metal change while the anneal process change.
در حالی که فرآیند تنلیم تغییر می کند، مقاومت و انعطاف پذیری فلز ترموستات مقاومت تغییر می کند.
It also suggests some ways to improve the techniques of acid cleaning, bonderizing, annealing and deformation.
همچنین، روش هایی برای بهبود تکنیک های تمیز کردن اسیدی، باندینگ، تنلیم و تغییر شکل پیشنهاد می کند.
for case hardening respective decarbonizing respective bright annealing of long rod,bars and or wire bundles.
برای کار سخت، به ترتیب، دکربنیزاسیون، به ترتیب، تنلیم درخشان میله ها، نوارها و یا دسته سیم.
It is established the evaluation method of annealing detergence for copper rolling oil by simulating industrial program with thermogravimetric analyzer.
روش ارزیابی مواد شوینده تنلیم برای روغن نورد مس با شبیه سازی برنامه صنعتی با آنالیزگر وزنی حرارتی، اثبات شده است.
According to the user may also need to reprovision bright annealing line, the pressure of the entire park, and other sewing aids.
بر اساس کاربر، ممکن است نیاز به بازسازی خط تنلیم درخشان، فشار کل پارک و سایر کمک های دوخت نیز باشد.
Also, High electric field annealing of stressed PMOSFET and detrapping of trapped electrons on the gate oxide are studied deeply.
همچنین، تنلیم با میدان الکتریکی بالا از PMOSFET تحت تنش و آزاد شدن الکترون های به دام افتاده در اکسید گیت به طور عمیقی مورد مطالعه قرار می گیرد.
I conclude that the increase of detwinning stress with annealing temperature results from the surface hardening of the sample due to surface oxidation;
من نتیجه می گیرم که افزایش تنش جدا شدن با افزایش دمای تنلیم ناشی از سختی سطح نمونه به دلیل اکسیداسیون سطح است.
AAO is transforming noncrystal to crystal after annealing in 850℃,1000℃,1160℃.The range of utilization is increasing from the pH 5-10 to 2-13.
AAO پس از تنلیم در 850 درجه سانتیگراد، 1000 درجه سانتیگراد و 1160 درجه سانتیگراد از غیر بلوری به کریستال تبدیل می شود. محدوده استفاده از pH 5-10 به 2-13 در حال افزایش است.
They include laser doping, laser annealing, laser depositing film, solid-phase reaction induced by laser and laser photolithograph.
اینها شامل دوپینگ لیزر، تنلیم لیزر، رسوب فیلم لیزر، واکنش فاز جامد القا شده توسط لیزر و لیتوگرافی لیزر است.
First, the solid ice on the surface could have been annealed, meaning that its temperature could have been raised above the 78 Kelvin mark to allow the amorphous ice to recrystallize.
ابتدا، یخ جامد روی سطح ممکن است آنیل شده باشد، به این معنی که دمای آن بالاتر از علامت ۷۸ کلوین افزایش یافته است تا به یخ غیر شکل اجازه دهد دوباره کریستال شود.
It was reported that the detwinning stress in martensite of Ti-Ni alloys increases with increasing annealing temperature, but the reason for such a strange behavior has remained unclear.
گزارش شده است که تنش جدا شدن در مارتنزیت آلیاژهای Ti-Ni با افزایش دمای تنلیم افزایش می یابد، اما دلیل چنین رفتار عجیبی هنوز نامشخص باقی مانده است.
Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.
در این فرآیند، جوشکاری ها زیرلایه را از تولید گرما، تغییر شکل، عدم تنش، عدم وجود نقاط سخت و شرایط تنلیم تشکیل می دهند.
The main rason of leading to overhigh hydrogen content was insufficient anneal after forged.
علت اصلی ایجاد محتوای بالای هیدروژن، عدم کافی بودن عملیات تنلیم پس از آهنگری بود.
The resistivity and flexivity of the resistance thermostat metal change while the anneal process change.
در حالی که فرآیند تنلیم تغییر می کند، مقاومت و انعطاف پذیری فلز ترموستات مقاومت تغییر می کند.
It also suggests some ways to improve the techniques of acid cleaning, bonderizing, annealing and deformation.
همچنین، روش هایی برای بهبود تکنیک های تمیز کردن اسیدی، باندینگ، تنلیم و تغییر شکل پیشنهاد می کند.
for case hardening respective decarbonizing respective bright annealing of long rod,bars and or wire bundles.
برای کار سخت، به ترتیب، دکربنیزاسیون، به ترتیب، تنلیم درخشان میله ها، نوارها و یا دسته سیم.
It is established the evaluation method of annealing detergence for copper rolling oil by simulating industrial program with thermogravimetric analyzer.
روش ارزیابی مواد شوینده تنلیم برای روغن نورد مس با شبیه سازی برنامه صنعتی با آنالیزگر وزنی حرارتی، اثبات شده است.
According to the user may also need to reprovision bright annealing line, the pressure of the entire park, and other sewing aids.
بر اساس کاربر، ممکن است نیاز به بازسازی خط تنلیم درخشان، فشار کل پارک و سایر کمک های دوخت نیز باشد.
Also, High electric field annealing of stressed PMOSFET and detrapping of trapped electrons on the gate oxide are studied deeply.
همچنین، تنلیم با میدان الکتریکی بالا از PMOSFET تحت تنش و آزاد شدن الکترون های به دام افتاده در اکسید گیت به طور عمیقی مورد مطالعه قرار می گیرد.
I conclude that the increase of detwinning stress with annealing temperature results from the surface hardening of the sample due to surface oxidation;
من نتیجه می گیرم که افزایش تنش جدا شدن با افزایش دمای تنلیم ناشی از سختی سطح نمونه به دلیل اکسیداسیون سطح است.
AAO is transforming noncrystal to crystal after annealing in 850℃,1000℃,1160℃.The range of utilization is increasing from the pH 5-10 to 2-13.
AAO پس از تنلیم در 850 درجه سانتیگراد، 1000 درجه سانتیگراد و 1160 درجه سانتیگراد از غیر بلوری به کریستال تبدیل می شود. محدوده استفاده از pH 5-10 به 2-13 در حال افزایش است.
They include laser doping, laser annealing, laser depositing film, solid-phase reaction induced by laser and laser photolithograph.
اینها شامل دوپینگ لیزر، تنلیم لیزر، رسوب فیلم لیزر، واکنش فاز جامد القا شده توسط لیزر و لیتوگرافی لیزر است.
First, the solid ice on the surface could have been annealed, meaning that its temperature could have been raised above the 78 Kelvin mark to allow the amorphous ice to recrystallize.
ابتدا، یخ جامد روی سطح ممکن است آنیل شده باشد، به این معنی که دمای آن بالاتر از علامت ۷۸ کلوین افزایش یافته است تا به یخ غیر شکل اجازه دهد دوباره کریستال شود.
It was reported that the detwinning stress in martensite of Ti-Ni alloys increases with increasing annealing temperature, but the reason for such a strange behavior has remained unclear.
گزارش شده است که تنش جدا شدن در مارتنزیت آلیاژهای Ti-Ni با افزایش دمای تنلیم افزایش می یابد، اما دلیل چنین رفتار عجیبی هنوز نامشخص باقی مانده است.
Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.
در این فرآیند، جوشکاری ها زیرلایه را از تولید گرما، تغییر شکل، عدم تنش، عدم وجود نقاط سخت و شرایط تنلیم تشکیل می دهند.
لغات پرجستجو را کاوش کنید
میخواهید واژگان را مؤثرتر یاد بگیرید؟ اپلیکیشن DictoGo را دانلود کنید و از امکانات بیشتری برای حفظ و مرور واژگان لذت ببرید!
همین حالا DictoGo را دانلود کنید